Allied Telesis AT-S83 - Manual (Page 48)

Chapter 4: View Mode Commands
48
CLEAR MAC ADDRESS-TABLE
Syntax
clear mac address-table
Parameters
mac Indicates all of the Layer-2 MAC addresses. Choose from
the following:
dynamic Indicates all dynamic entries.
multicast Indicates all multicast entries.
static Indicates all MAC address entries configured
through the management interface.
Description
Use the CLEAR MAC command to clear the Layer-2 MAC addresses.
Command Mode
View and Privileged Executive modes
Example
The following command clears all of the dynamic Layer-2 MAC addresses:
switch#clear mac address-table dynamic
Related Commands
none