Allied Telesis AT-S83 - Manual (Page 337)

AT-S83 Management Software Command Line Interface User’s Guide
337
MAX-UNUSE-PACKET
Syntax
max-unuse-packet <0 - 65535>
no max-unuse-packet
Parameters
none
Description
Use the MAX-UNUSE-PACKET command to set the maximum number of
unused OSPF packets maintained internally to avoid additional memory
allocation and deletion. Specify a value between 0 and 65,535.
Use the no form of this command to return it to the default value. The
default value is 200.
Command Mode
Router mode
Example
The following example sets the MAX-UNUSE-PACKET value to a
maximum of 300 unused OSPF packets:
switch#configure terminal
switch(config)#router ospf 100
switch(config-router)#max-unuse-packet 300
Related Commands
none