beautypg.com

Undebug ospf lsa – Allied Telesis AT-S83 User Manual

Page 93

background image

AT-S83 Management Software Command Line Interface User’s Guide

93

UNDEBUG OSPF LSA

Syntax

undebug ospf lsa flooding|generate|install|maxage
|refresh

no undebug lsa status|events|timers

Parameters

flooding

Displays Link State Advertisements (LSA) flooding information.

generate Displays LSA generation information.

install

Displays LSA installation information.

maxage

Displays the maximum age of the LSA in seconds.

refresh

Displays the LSA refresh information.

Description

Use the UNDEBUG OSPF LSA command to disable the display of
troubleshooting information related to the internal operations of LSAs. Use
the no form of this command to disable this function.

Command Modes

Privileged Executive and Configuration Terminal modes

Examples

The following command disables the display of LSA refresh information:

switch(config)#undebug ospf lsa refresh

The following command disables the display of the maximum age of
the LSA:

switch(config)#undebug ospf lsa maxage

Related Commands

“LOG FILE” on page 129