beautypg.com

Radius-server retransmit retries – Allied Telesis AT-S83 User Manual

Page 229

background image

AT-S83 Management Software Command Line Interface User’s Guide

229

RADIUS-SERVER RETRANSMIT RETRIES

Syntax

radius-server retransmit <1-100>

no radius-server retransmit

Parameters

<1-100>

Specifies the number of retries. Choose a value between 1
and 100.

Description

Use the RADIUS-SERVER RETRANSMIT RETRIES command to set the
number of retries between a Radius server and a client.

To reset this command to its default value, use the no form of this
command. The default value is 3.

Command Mode

Configure mode

Example

The following commands set the number of retries to 18:

switch# configure terminal

switch(config)# radius-server retransmit 18

Related Commands

none

See also other documents in the category Allied Telesis Computer hardware: