Show ntp associations detail – Allied Telesis AT-S83 User Manual
Page 81
AT-S83 Management Software Command Line Interface User’s Guide
81
SHOW NTP ASSOCIATIONS DETAIL
Syntax
show ntp associations detail
Parameters
none
Description
Use the SHOW NTP ASSOCIATIONS DETAIL command to display
detailed information about the Network Time Protocol (NTP).
Command Mode
All modes
Example
The following is an example of the SHOW NTP ASSOCIATIONS DETAIL
command:
switch#show ntp associations detail
192.168.1.100 configured, sane, valid, leap_sub, stratum 16
ref ID INIT, time 00000000.00000000 ( 6:28:16.000 UTC
Fri Feb 7 2007
our mode client, peer mode unspec, our poll intvl 6,
peer poll intvl 10
root delay 0.00 msec, root disp 0.00, reach 000
delay 0.00 msec, offset 0.0000 msec, dispersion 0.00
precision 2**-20,
org time 00000000.00000000 ( 6:28:16:000 UTC Fri Feb 7 2007)
rec time 00000000.00000000 ( 6:28:16:000 UTC Fri Feb 7
2007)
xmt time 83aa7f8f.635ba2be (0:4:31:388 UTC Fri Jan 1 2007)
filtdelay = 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
filtoffset = 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
filterror = 16000.00 16000.00 16000.00 16000.00 16000.00
16000.00 16000.00 16000.00
Related Commands