Allied Telesis AT-S83 - Manual (Page 251)

AT-S83 Management Software Command Line Interface User’s Guide
251
SPANNING-TREE CISCO-INTEROPERABILITY
Syntax
spanning-tree cisco-interoperability disable|enable
Parameters
disable Disables interoperability with Cisco’s version of STP,
RSTP, and MSTP.
enable Enables interoperability with Cisco’s version of STP,
RSTP, and MSTP.
Description
Use the SPANNING-TREE CISCO-INTEROPERABILITY command to set
the status of CISCO interoperability of the STP, RSTP, and MSTP
protocols with the AT-S83 software.
Command Mode
Configuration Terminal mode
Example
The following commands enable CISCO interoperability of the Spanning
Tree Protocols and the AT-S83 software:
switch#configure terminal
switch(config)#spanning-tree cisco-interoperability
Related Commands
none