Allied Telesis AT-S83 - Manual (Page 84)

Chapter 5: Privileged Executive Mode Commands
84
SHOW SYSTEM STATUS
Syntax
show system status
Parameters
none
Description
Use the SHOW SYSTEM STATUS command to display information about
the system power and fan status.
Command Mode
All modes
Example
The following is an example of the SHOW SYSTEM STATUS command:
switch#show system status
System hardware status:
System 1.25V Power............ 1.238V
System 1.8V Power ............ 1.810V
System 3.0V Power ............ 2.995V
System 3.3V Power ............ 3.300V
System 5V Power .............. 5.26V
System 12V Power ............. 11.875V
System Temperature (Celsius).. 31 C
System Fan 1 Speed ........... 4963 RPM
System Fan 2 Speed ........... 4963 RPM
System Fan 3 Speed ........... 4963 RPM
System Fan 4 Speed ........... 4921 RPM
System Fan 5 Speed ........... 4821 RPM
Main PSU Power.................On
Main PSU Temp................. Normal
Main PSU Fan.................. Functional
Main PSU ..................... Installed
RPS PSU Power................. Off
RPS PSU Temp.................. Normal
RPS PSU Fan................... Functional
RPS PSU ...................... Installed
Related Commands
none