Allied Telesis AT-S83 - Manual (Page 114)

Chapter 6: Configuration Terminal Mode Commands
114
DEBUG OSPF NFSM
Syntax
debug ospf nfsm status|events|timers
no debug nfsm status|events|timers
Parameters
status Displays OSPF Neighbor Finite State Machine (NFSM) status
information.
events Displays NFSM event information.
timers Displays NFSM timer information.
Description
Use the DEBUG OSPF NFSM command to display debug information
related to NFSM. Use the no form of this command or the UNDEBUG
OSPF NFSM command to disable this function.
Command Modes
Privileged Executive and Configuration Terminal modes
Examples
The following command displays NFSM status information:
switch(config)#debug ospf nfsm status
The following command displays NFSM event information:
switch(config)#debug ospf nfsm event
Related Commands
“LOG FILE” on page 129, “UNDEBUG OSPF NFSM” on page 94