Clear ip rip route – Allied Telesis AT-S83 User Manual

Page 271

AT-S83 Management Software Command Line Interface User’s Guide

271

CLEAR IP RIP ROUTE

Syntax

Parameters

A.B.C.D/M

Removes entries from the RIP routing table which match
this destination address.

all

Clears the entire RIP routing table.

connected

Removes entries for connected routes from the RIP

routing table.

isis

Removes only IS-IS routes from the RIP routing table

kernel

Removes kernel routes from the RIP routing table.

ospf

Removes only OSPF routes from the RIP routing table.

rip

Removes only RIP routes from the RIP routing table.

static

Removes static entries from the RIP routing table.

Description

Use the CLEAR IP RIP ROUTE command to clear data from the RIP
routing table. To delete the RIP routes learned from a neighbor router and
keep the RIP network intact, use the rip parameter with this command.

Using this command with the all parameter clears the RIP table of all the
routes. If you do not want to delete a RIP network, use the
REDISTRIBUTE CONNECTED command and make the RIP network a
connected route.

Command Mode

View and Privileged Executive modes

Examples

The following command removes entries from the RIP routing table with
the IP address of 10.0.0.0/8:

switch#clear ip rip route 10.0.0.0/8