Allied Telesis AT-S83 - Manual (Page 119)

AT-S83 Management Software Command Line Interface User’s Guide
119
DOT1X SYSTEM-AUTH-CTRL
Syntax
dot1x system-auth-ctrl
Parameters
system-auth-ctrl Enable global interface authentication.
Description
Use the DOT1X SYSTEM-AUTH-CTRL command to enable
authentication globally on interfaces 1 through 8. Global authentication is
disabled by default.
Command Mode
Configuration Terminal mode
Example
The following commands enable 802.1x Port Based Access Control on all
interfaces:
switch#configure terminal
switch(config)#dot1x system-auth-ctrl
Related Commands
“SHOW RUNNING-CONFIG” on page 64