Allied Telesis AT-S83 - Manual (Page 179)

AT-S83 Management Software Command Line Interface User’s Guide
179
IP ACCESS-GROUP
Syntax
ip access-group <1-199>|<1300-2699> in|out
Parameters
access-group Sets an access group. Choose from the following options:
1-199 Specifies a standard or extended IP
access list.
1300-2699 Specifies a standard or extended
Expanded- IP-access list.
in Specifies inbound packets.
out Specifies outbound packets.
Description
Use the IP ACCESS-GROUP command to define an access group and
whether it permits inbound or outbound packets.
Command Mode
Interface mode
Example
The following commands set the access group 1300 to accept inbound
packets on interface 7:
switch#configure terminal
switch(config)#interface xe7
switch(config-if)#ip access-group 1300 in
Related Commands
none