Allied Telesis AT-S83 - Manual (Page 27)

AT-S83 Management Software Command Line Interface User’s Guide
27
Starting the Command Line Interface
To start the command line interface, perform the following procedure:
1. Type the user id and password.
There are two default user ids and passwords. For the system
administrator login, the default user id is “manager” and the default
password is “friend.” For the operator login, the default user id is
“operator” and the default password is “operator.”
A command line prompt is displayed in Figure 2.
Figure 2. Command Line Login Screen
The default switch name is “(none)” and the pound sign (#) prompt
indicates the Privileged Executive mode which is the default mode
accessed by the manager login.
If you login with the operator login id, the prompt changes to “none>” to
indicate the View mode.
Username:manager
Password:
(none) #