Allied Telesis AT-S83 - Manual (Page 361)

AT-S83 Management Software Command Line Interface User’s Guide
361
SHOW VLAN
Syntax
show vlan all|brief|static|dyanmic VLANID <2-4094>
Parameters
vlan Specifies the type of VLAN to display. Select from the following
options:
all Displays all types of VLANs in expanded format.
brief Displays all types of VLANs in abbreviated format.
static Displays information about static VLANs.
dynamic Displays information about dynamic VLANs.
VLANID Enter the VLAN ID. The range is from 2 to 4,094.
Description
Use the SHOW VLAN command to display information about a VLAN by
specifying the VLAN ID. The default VLAN, or native VLAN, is VLAN 1.
Command Mode
View and Privileged Executive modes
Example
The following example displays the command and its resulting output:
switch# configure terminal
switch# show vlan all
VLAN ID Name Type State Member ports
([u] Untagged),
([t]-Tagged)
2 VLAN0002 STATIC ACTIVE xe1(u) xe2(u)
xe3(u) xe4 (u)
xe5(u) xe6(u)
xe7(u) xe8(u)