beautypg.com

Ntp server – Allied Telesis AT-S83 User Manual

Page 142

background image

Chapter 6: Configuration Terminal Mode Commands

142

NTP SERVER

Syntax

ntp server WORD

Parameters

WORD

Indicates the IP address of the NTP server. Use the

following format:

xxx.xxx.xxx.xxx

Description

Use the NTP SERVER command to specify the IP address of the NTP
server.

Note

To add more than one NTP server to the switch, enter a second
NTP SERVER command with another IP address.

Command Mode

Configuration Terminal mode

Example

The following example sets the IP address of the NTP server to 198.11.1.9
and shows the resulting display:

switch#configure terminal

switch(config)#ntp server 198.11.1.9

Translating “198.11.1.9”... [OK]

Related Commands

“NTP MASTER” on page 140, “NTP PEER” on page 141