Allied Telesis AT-S83 - Manual (Page 231)

AT-S83 Management Software Command Line Interface User’s Guide
231
SHOW DOT1X
Syntax
show dot1x
Parameters
none
Description
Use this command to display the status of the 802.1x feature on the
switch.
To modify the lines displayed, use the | (output modifier token); to save the
output to a file, use the > (output redirection token). For more information,
see the Command Line Interface Environment.
Command Mode
Privileged Executive mode
Example
The following example shows the SHOW DOT1X command and the
resulting display:
switch# show dot1x
% 802.1x authentication enabled
% Raduis server address: 192.168.1.1.1812
% Radius client address: dhcp128.ipinfusion.com.12103
% Next radius message id: 0
Related Commands
“SHOW DOT1X ALL” on page 232
“SHOW DOT1X INTERFACE” on page 235