IAI America SCON-CA User Manual

Page 201

Chapter 7

Absolute Reset and

Absolute Battery

191

7.2.2 Replacement of absolute battery

For the battery replacement, remove the battery connector while keeping the power to the

controller ON, and change the battery installed in the battery holder.

Caution: To replace the old absolute battery with a new one with the controller power being

OFF, complete the replacement within 15 minutes from the removal of the old

battery. The absolute data may get lost if it exceeds 15 minutes.

[Removal]

[Attachment]

Disconnect the

connector and pull

out the battery.

Put battery into

battery holder.

Plug in connector to

absolute battery

connector.