Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 86)

Global Configuration Commands
Wavecom Slow Idle Mode +W32K
©Restricted Page: 80 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.8 Wavecom Slow Idle Mode +W32K
6.8.1 Description
This Wavecom proprietary command allows the slow idle mode to be enabled or
disabled.
With this command, a specific procedure on RS232 serial link is requested to activate
or deactivate slow idle mode.
6.8.2 Syntax
Action command
AT+W32K=
OK
Read command
None
Test command
None
6.8.3 Parameters and Defined Values
: slow idle mode
0 disable
1 enable
6.8.4 Parameter Storage
None.