Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 289)

GPRS Commands
PDP Context Activate or Deactivate +CGACT
©Restricted
Page: 99 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
14.5 PDP Context Activate or Deactivate +CGACT
14.5.1 Description
This command is used to activate or deactivate the specified PDP context(s). After the
command has completed, the MT remains in V.25ter command state. If any PDP
context is already in the requested state, the state for that context remains
unchanged.
14.5.2 Syntax
Action command
AT+CGACT=[,[,[,…]]]
OK
Read command
AT+CGACT?
+CGACT: ,
[+CGACT: ,[…]]
OK
Test command
AT+CGACT=?
+CGACT: (list of supported s)
OK