Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 202)

GSM Network Commands
Cell environment description +CCED
©Restricted
Page: 12 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
11.3 Cell environment description +CCED
11.3.1 Description
This Wavecom proprietary command retrieves the parameters of the main cell and of
up to six neighbouring cells.
There are two possible methods to provide these cell parameters:
• On request by the application or
• Automatically by the product every 5 seconds.
Automatic mode is not supported during registration.
11.3.2 Syntax
Action command
AT+CCED=[,[,]]
[+CSQ: ,]
[+CCED: [
dump>[,]]]]]][[,]
>
][[,]
TA>][[,]][[,]][[,]TA>][[,]][[,]]]
OK
Read command
None
Test command
None
Unsolicited response
[+CSQ: ,]
[+CCED: [