Appendixes, Codes and values – Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual
Page 713

APPENDIXES
Codes and Values
© Restricted
Page:
7 / 80
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001
APPENDIXES
August 23,
2007
Meaning
Resulting from the following commands
536
Class locked: a command has
been launched from a port, the
effect is to lock all commands
belonging to the same class. If
another port launches a command
of this class, this error will occur
as long as the class is not
released (at first command’s
completion time)
All commands
537
Phonebook group full.
+CPBW
538
Not Enough Space to copy SMS
+WMCP
539 Invalid
SMS
+CMGR
541 Open
AT
®
application and AT
software version do not match
+WOPEN
543
CMUX connection is refused by
remote, after a restart of CMUX
protocol by Wireless CPU
®
, due to
a 27.010 connection loss during
virtual channels establishment.
+CMUX
544
CMUX connection Timeout (no
answer from the remote) ie no
DLC0 opened response.
+CMUX
545
A CMUX session has been started
on a physical UART, and user
tries to start another CMUX
session on other physical UART.
The error,
+CME ERROR: 545
is
raised on
the UART where
at+cmux
command is trying to be
started again.
+CMUX
546
Emergency call is not allowed
without SIM
+COPS
547
Emergency call is allowed without
SIM
+COPS
548
No flash objects to delete
+WOPEN
549
The phone number of the
requested phonebook entry is
empty
ATD>
550
Unable to resize the Application &
Data storage place, since the new
required size would overlap with
the current Open AT
®
application
storage place.
+WOPEN
551
Service abort request has failed
AT +WAC
552
Unsolicited responses for
autodiag or charge indications are
already activated on another port
+WDIAG, +WBCM
553
The PUK 1 code is burned but PIN
1/CHV 1 code is OK
+CPIN, +CKPD, D (sequence)
554
The SIM is blocked (PIN 1/CHV 1
and PUK 1 codes are burned)
All GSM 07.07 commands
555
AT command aborted by a
POWER OFF (the AT command
treatment should be partial)
+COPS, +CPIN, +CPIN2, +CMGL, +CMGR, +CMGD,
+WDCP, +WLPR, +WLPW, +CCID, +CSIM, +CRSM,
+CLCK, +CACM, +CAMM, +CPUC, +WMSC, +WMCP,
+CPOL, +CSQ, +CCED