Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 108)

Global Configuration Commands
Wavecom Phonebook Character Set +WPCS
©Restricted Page: 102 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.18.3 Parameters and Defined Values
:
character table set (ASCII string)
"TRANSPARENT" transparent mode
The strings are displayed and entered as they are stored
in SIM or in ME. (default value)
"CUSTOM" user defined character set
"HEX" hexadecimal mode
No character set used; the user can read or write
hexadecimal values.
6.18.4 Parameter Storage
The parameter is stored in EEPROM using AT&W command. The
default value can be restored using AT&F.
6.18.5 Examples
Command Responses
AT+WPCS=?
Note: Get possible values
+WPCS: ("TRANSPARENT","HEX","CUSTOM")
OK
Note: Possible values
AT+WPCS="CUSTOM"
Note: Custom character set
OK
AT+WPCS? +WPCS: "CUSTOM"
Note: Get current value OK