Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual
Page 415
Short message Commands
Set Text Mode Parameters +CSMP
©Restricted
Page:
69 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001
VOLUME 3
August 23, 2007
17.3.3
Parameters and Defined Values
see note below
validity period
In text mode is only coded in "relative" format.
default value 167 (24 hours)
This means that one byte can describe different values.
0 to 143
(VP + 1) x 5 minutes (up to 12 hours)
144 to 167
12 hours + ( (VP – 143) x 30 minutes )
168 to 196
(VP – 166) x 1 day
197 to 255
(VP – 192) x 1 week
protocol Id (please refer to [1])
string type
data encoding scheme (please refer to [1])
integer type
Note:
The
b7 b6 b5 b4 b3 b2 b1 b0
RP UDHI
SRR
VPF
RD Mit
RP:
Reply Path, not used in text mode
UDHI:
User Data Header Information
b6=1 if the beginning of the User Data field contains a Header in
addition to the short message. This option is not supported in
+CSMP command, but can be used in PDU mode (+CMGS).
SRR:
Status Report Request.
B5=1 if a status report is requested. This mode is supported.
VPF:
Validity Period Format
b4=0 & b3=0 ->
b4=1 & b3=0 ->
Others formats (absolute & enhanced) are not supported.
RD:
Reject Duplicates
b2=1 to instruct the SC to reject an SMS-SUBMIT for an SM still
held in the SC which has the same
the previously submitted SM from the same