Call control commands, Dial command to a specific number d, 12 call control commands – Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual
Page 224

Call Control Commands
Dial Command to a specific number D
©Restricted
Page:
34 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001
VOLUME 2
August 23, 2007
12
Call Control Commands
12.1
Dial Command to a specific number D
Emergency call
Normal call
12.1.1 Description
The ATD command is used to set a voice, data or fax call. As per GSM 02.30, the dial
command also controls supplementary services.
The following Emergency Numbers are available without a SIM card:
000, 08, 110, 112, 118, 119, 911 and 999.
The following Emergency Numbers are available with a SIM card:
• when EF_ECC file is missing from SIM: 112 and 911
• when SIM includes an EF_ECC file: 112, 911 and any Emergency Numbers
available in the EF_ECC file.
12.1.2 Syntax
Action command
ATD
[Depending of GSM sequence]
OK / CONNECT
Read command
None
Test command
None