Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 60)

Global Configuration Commands
Hardware Configuration +WHCNF
©Restricted Page: 54 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.2.5 Examples
Command Responses
AT+WHCNF=? +WHCNF: 0,(0-2)
+WHCNF: 1,(0-2)
+WHCNF: 2,(0-2)
+WHCNF: 3,(0-3)
OK
AT+WHCNF? +WHCNF: 0,1
+WHCNF: 1,1,0
+WHCNF: 2,0
+WHCNF: 3,0,0
OK
AT+WHCNF=0,2 +WHCNF: 0,1
OK
Note: Keypad is activated
AT+CMER=,1
Note: A sk key press event report
OK
+CKEV: 12,1
+CKEV: 12,0
Note: Key 12 has been pressed and released
AT+WHCNF=0,0
Note: The keypad is deactivated
OK
AT+WHCNF=1,0
Note: The flash LED is deactivated
OK
AT+WHCNF=2,0
Note: The 32 kHz output clock is deactivated
OK
AT+WHCNF=3,1
Note: The external SIM switch is activated
OK
AT+WHCNF=3,3
Note: Get the external SIM switch status
+WHCNF:3,1,1
OK
Note: The third parameter <1> indicates a Wireless CPU ®
reset is needed.