Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual
Page 428

Short message Commands
More Messages to Send +CMMS
©Restricted
Page:
82 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001
VOLUME 3
August 23, 2007
17.8.3
Parameters and Defined Values
operating mode
0
disable
feature
1
keeps link opened while messages are sent
If the delay between two messages exceeds 5 seconds, the
link is closed and the mode is reset to 0: the feature is
disabled.
2
keeps link opened while messages are sent
If the delay between two messages exceeds 5 seconds, the
link is closed but the mode remains set to 2: the feature is still
enabled.
17.8.4
Parameter Storage
None.
17.8.5
Examples
Command
Responses
AT+CMMS=?
+CMMS: (0-2)
OK
AT+CMMS=2
OK
Note: Feature is enabled, link is open
AT+CMMS?
+CMMS: 2
OK
17.8.6
Notes
• The delay of 5 seconds complies with Recommandation 3GPP TS 27.005 [19].
• Before sending the last SMS in the link, use AT+CMMS=0 command. This
command will indicate that the next SMS will be the last one.