Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 100)

Global Configuration Commands
Display configuration &V
©Restricted Page: 94 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.15 Display configuration &V
6.15.1 Description.
This command is used to display the Wireless CPU ® configuration.
6.15.2 Syntax
Action command
AT&V[]
Q: V: S0: S2: S3: S4: S5:
+CR: +CRC: +CMEE: +CBST:
+SPEAKER: +ECHO: &C: &D: %C:
[+IPR:] +ICF: +IFC:
OK
Note: For each parameter, please refer to the corresponding command.
Read command
None
Test command
None
6.15.3 Parameters and Defined Values
: display control parameter
0 display the Wireless CPU ® configuration in RAM (default value if
no parameter provided)
1 display the Wireless CPU ® configuration in EEPROM
2 display the Wireless CPU ® factory configuration
6.15.4 Parameter Storage
None.