Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 626)

I/O Commands
Input/Output Management +WIOM
©Restricted
Page: 78 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
Command Responses
+WIOM: 28,0
+WIOM: 29,0
+WIOM: 30,0
+WIOM: 31,0
+WIOM: 32,0
+WIOM: 33,0
+WIOM: 34,0
+WIOM: 35,0
+WIOM: 36,2
+WIOM: 37,2
+WIOM: 38,2
+WIOM: 39,2
+WIOM: 40,2
+WIOM: 41,2
+WIOM: 42,2
+WIOM: 43,2
+WIOM: 44,0
OK
Note: The GPIO 1 is now as output
AT+WIOM=3,0 OK
Note: The GPIO 3 is used by a feature but it can be
configurable and this state will be updated when the
feature associated to this GPIO is deactivated
AT+WIOM=1,0 OK
Note: The GPIO 1 is configured as input