Plmn commands – Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual
Page 329

PLMN Commands
Operator Selection +COPS
©Restricted
Page:
139 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001
VOLUME 2
August 23, 2007
Test command
AT+COPS=?
+COPS: [list of supported (
alphanumeric
OK
15.2.3 Parameters and Defined Values
network registration mode
0
automatic
(default
value)
1
manual
2
deregistration; ME will be unregistered until
is selected
3
set only
4
manual/automatic (
selection fails, automatic mode is entered.
format of
0
long alphanumeric format
1
short alphanumeric format
2
numeric
status of
0
unknown
1
available
2
current
3
forbidden
operator identifier (MCC/MNC in numeric format only for
operator selection)
The long alphanumeric format can be up to 16 characters long
(for operator names description see "Operator names" section in
the present document "Appendixes"; field is "Name"). The short
alphanumeric format can be up to 10 characters long.