Result code suppression q – Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual

Page 149

Serial Port Commands

Result Code Suppression Q

©Restricted

Page:

143 / 184

This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.

WM_DEV_OAT_UGD_049 - 001

VOLUME 1

August 23, 2007

8.5

Result Code Suppression Q

8.5.1

Description

This command determines whether the mobile equipment sends result codes or not.

8.5.2

Syntax

Action command

ATQ[]

[OK]

Read command

None

Test command

None

8.5.3

Parameters and Defined Values

result code transmission parameter

DCE transmits result codes.

Result codes are suppressed and not transmitted (default value).

8.5.4

Parameter Storage

The parameter is stored in EEPROM using AT&W command. The default value

can be restored using AT&F.

8.5.5

Examples

Command

Responses

ATQ0

Note: DCE transmits result codes

Note: Command valid

ATQ1

Note: Result codes are suppressed and not

transmitted

Note: No response