Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 583)

Audio Commands
Audio Filter Command +WADF
©Restricted
Page: 35 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
21.10 Audio Filter Command +WADF
21.10.1 Description
This Wavecom proprietary command enables/disables the high and low pass filter in
TX and RX mode.
21.10.2 Syntax
Action command
AT+WADF=,[,[][,[]
[,[][,[][,[][,[][,[][,
[][,[][,[]]]]]]]]]]]
[+WADF:
,,,,,,,
,,,,]
OK
Read command
AT+WADF?
+WADF: ,,,,,
,,,,,,
[+WADF: ,,,,,
,,,,,,[…]]
OK
Test command
AT+WADF=?
+WADF: (list of supported s),(list of supported s),
(list of supported s),(list of supported s),
(list of supported s),(list of supported s),
(list of supported s),(list of supported s),
(list of supported s),(list of supported s),
(list of supported s),(list of supported s)
OK