Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 718)

APPENDIXES
Codes and Values
© Restricted
Page: 12 / 80
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 APPENDIXES August 23, 2007
Error # Error label Description
47 Resources unavailable,
unspecified
This cause is used to report a resource
unavailable event only when no other cause
applies.
50 Requested facility not
subscribed
The requested short message service could not
be provided by the network because the user has
not completed the necessary administrative
arrangements with its supporting networks.
69 Requested facility not
implemented The network is unable to provide the requested
short message service.
81 Invalid short message
transfer reference value
The equipment sending this cause has received a
message with a short message reference which
is not currently in use on the MS-network
interface.
95 Invalid message,
unspecified
This cause is used to report an invalid message
event only when no other cause in the invalid
message class applies.
96 Invalid mandatory
information
The equipment sending this cause has received a
message where a mandatory information
element is missing and/or has a content error
(both cases are undistinguishable).
97 Message type non-
existent or not
implemented
The equipment sending this cause has received a
message with a message type it does not
recognize either because this is a message not
defined or defined but not implemented by the
equipment sending this cause.
98 Message not compatible
with short message
protocol state
The equipment sending this cause has received a
message such that the procedures do not
indicate that this is a permissible message to
receive while in the short message transfer state.
99 Information element
non-existent or not
implemented
The equipment sending this cause has received a
message which includes unrecognized
information elements because the information
element identifier is not defined or it is defined
but not implemented by the equipment sending
the cause.
However, the information element is not required
to be present in the message so that the
equipment sends the cause to process the
message.
111 Protocol error,
unspecified This cause is used to report a protocol error
event only when no other cause applies.
127 Inter-working,
unspecified
There has been inter-working with a network
which does not provide causes for actions it
takes; thus, the precise cause for a message
which is being sent cannot be ascertained.