Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 503)

SIM ToolKit Commands
SIM ToolKit Give Response +STGR
©Restricted
Page: 157 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
Test command
AT+STGR=?
OK
19.5.3 Parameters and Defined Values
: command type
0 item selection in the main menu
1 user confirmation to clear a "DISP TEXT"
2 response for a "GET INKEY"
3 response for a "GET INPUT"
4 response for a "SETUP CALL"
6 response for a "SEL ITEM"
11 response for a "SETUP EVENT LIST"
12 response for a "SETUP IDLE MODE TEXT"
95 send "BACKWARD MOVE" to SIM
96 send "BEYOND CAPABILITIES" to SIM
97 send "UNABLE TO PROCESS" to SIM
98 send "NO RESPONSE" to SIM
99 send "END SESSION" to SIM
• Values when =0 (Select an item from the main menu)
: user action
1 item selected by the user
2 help information required by user
: item identifier of the item selected by the user
integer type
• Values when =1 (Select an item from the main menu)
None.