Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 134)

Wireless CPU ® Status Commands
Mobile Equipment Event Reporting +CMER
©Restricted Page: 128 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
7.5.3 Parameters and Defined Values
:
3 (default value)
: keypad event reporting mode
0 disabled (default value)
1 Keypad event reporting is routed using unsolicited code. Only
the key pressings not caused by +CKPD are indicated
2 Keypad event reporting is routed using unsolicited code. All key
pressings are indicated
: indicator event reporting mode
0 disabled (default value)
1 Indicator event reporting using unsolicited result code. Only the
indicator events not caused by +CIND shall be indicated by the
TA to TE
2 Indicator event reporting using unsolicited result code. All
indicator events shall be directed from TA to TE
: keyboard map is (5,5)
0 1 2 3 4
5 6 7 8 9
10 11 12 13 14
15 16 17 18 19
20 21 22 23 24
: key operation
1 key pressed
0 key released
: indicator order number (as specified for +CIND)
: new value of the indicator
As specified for +CIND except for the indication:
0: the selected memory becomes not full
1: the selected memory has been filled
2: One SMS has been received in the SC but the selected memory
is full
: TA buffer of unsolicited result codes mode
0 TA buffer defined within this command is flushed to the TE
default value