Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 474)

SIM Commands
Generic SIM Access +CSIM
©Restricted
Page: 128 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
returned for the following instructions (See CRSM commands).
· C2 : ENVELOPE
· A2 : SEEK
· A4 : SELECT
Fifth Byte Value Restriction:
For the following instructions (Second Byte):
· A4 : SELECT
· 10 : TERMINAL PROFILE
· C2 : ENVELOPE
· 14 : TERMINAL RESPONSE
· A2 : SEEK
the user must make sure that the value of the fifth Byte of the
instruction corresponds of the length of bytes (data starting
from 6th byte) which follow it.
The value of the Fifth Byte must be equal of the value:
/2 – 5, else the command is not send to the SIM and
"CME ERROR: 3" is returned.
: Response to the command passed on by the SIM to the MT in
the format as described in 3GPP 11.11 [9] (or 3GPP 51.011 [13])
(hexadecimal character format; refer to CSCS).
hexadecimal type
18.3.4 Parameter Storage
None.
18.3.5 Examples
Command Responses
AT+CSIM=14,"A0A40000027F20"
Note: Select DF Telecom (7F20)
+CSIM: 4,"9F16"
OK
Note : Command correctly treated with length 16
for response data
AT+CSIM? OK
AT+CSIM=? OK