Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 729)

APPENDIXES
Examples
© Restricted
Page: 23 / 80
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 APPENDIXES August 23, 2007
2.3 Example with Incoming Calls
2.3.1 When the ME is powered on and the SIM PIN has been entered.
AT+CMEE=1 Enable the report mobile equipment errors
OK
AT+WIND=63 Ask to display the general indications .
OK
AT+CLIP=1 Enable the calling line identification presentation .
OK
AT+CRC=1 Enable extended format of incoming indication .
OK
AT+CNUM Query own number (voice number) or MSISDN .
+CNUM: "Speech","+33608971019",145
OK
Call this number from another equipment.
+WIND: 5, 1 Indication of call (Ring)
+CRING: VOICE Type of call is VOICE .
+CLIP: "+33607103543",145,,,"John Panborn" Identification of the remote party .
+CRING: VOICE
ATA Answer the call .
OK
…Conversation…
NO CARRIER The call has been released by the remote party .
+WIND: 6,1 Indication of call release .
2.4 Example of a Call Forwarding
2.4.1 When the ME is powered on and the SIM PIN has been entered.
AT+CMEE=1
Enable the report mobile equipment errors
OK
AT+CCFC=1,3,"0607492638" Register to a call forwarding when ME is busy .
OK
AT+CCFC=2,3,"0149293031",129 Register to a call forwarding when it does answer .
+CME ERROR: 30 No network service
AT+CCFC=1,2 Interrogate
+CCFC: 1,1,"+33607492638",145 Call forwarding active for a voice call .
AT+CCFC=1,4 Delete call forwarding ME busy
OK