Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 258)

Data Commands
DTE-DCE Local Rate Reporting +ILRR
©Restricted
Page: 68 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
13.3 DTE-DCE Local Rate Reporting +ILRR
13.3.1 Description
This command controls whether a +ILRR unsolicited response is sent to the
application with the current (negotiated or renegotiated) DTE-DCE speed rate.
If enabled, the unsolicited result code is transmitted in an incoming or outgoing data
call, after any data compression report, and before any connection indication
(CONNECT).
13.3.2 Syntax
Action command
AT+ILRR=
OK
Read command
AT+ILRR?
+ILRR:
OK
Test command
AT+ILRR=?
+ILRR: (list of supported s)
OK
Unsolicited response
+ILRR: