Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 130)

Wireless CPU ® Status Commands
Indicator Control +CIND
©Restricted Page: 124 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
7.4 Indicator Control +CIND
7.4.1 Description
This command is used to read or set the values of ME indicators. If ME does not
allow setting of indicators or ME is not currently reachable, "+CME ERROR: " is
returned.
7.4.2 Syntax
Action command
None
Read command
AT+CIND?
+CIND: ,,,,,,
OK
Test command
AT+CIND=?
+CIND: (,(list of supported s))[,(,(list of
supported s))[,…]]
OK