Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual
Page 226

Call Control Commands
Dial Command to a specific number D
©Restricted
Page:
36 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001
VOLUME 2
August 23, 2007
12.1.5 Examples
Command
Responses
ATD0123456789;
Note: Call the 0123456789 number, voice call
OK
Note: Call succeeds
ATD0123456789P123;
Note: Call the 0123456789 number, voice call with a
pause and DTMF sequence 123
OK
ATD0123456789
Note: Call the 0123456789 number, data call
CONNECT 9600
Note: Call succeeds
ATD*#21#
Note: Check any call forwarding status
+CCFC: 0,7
OK
Note: No call forwarding
12.1.6 Notes
• If a GPRS PPP session is already running, the setting of a CSD (GSM data call)
is not supported.
• For an international number, the local international prefix does not need to be
set (usually 00) but must be replaced by the ‘+’ character.
Example: to set up a voice call to Wavecom offices from another country, the
AT command is: "ATD+33146290800;"
• Note that some countries may have specific numbering rules for their GSM
handset numbering.
• When the FDN phonebook has been activated (see +CLCK command), only
numbers beginning with the digits of FDN phonebook entries can be called.
For example, if “014629” is entered in the FDN phonebook all the phone
numbers beginning with these 6 digits can be called.
• An outgoing call attempt can be refused if the AOC service is active and credit
has expired (NO CARRIER).
• As per GSM 02.30, GSM sequences may be controlled using dial commands.
These sequences can contain “*”, “#”, but “;” is forbidden in the sequence. For
example, to invoke or suppress CLIR service temporally, ATD*31#
ATD#31#
launched).
• If the FDN phonebook is activated, the call forwarding sequences are allowed
only if they are present in the FDN.
• See GSM Sequence List pragraph in the Appendixes to have the list of
supported sequences.