Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 395)

Phonebooks Commands
Settings of a Group +WPGS
©Restricted
Page: 49 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
16.10 Settings of a Group +WPGS
16.10.1 Description
This Wavecom proprietary command sets the parameters for a group.
16.10.2 Syntax
Depending on the mode, several syntaxes are available for the action command:
• = 0
Action command
AT+WPGS=,
+WPGS:
OK
• = 1
Action command
AT+WPGS=,,
OK
Read command
None
Test command
AT+WPGS=?
+WPGS: (list of supported s),(list of supported index>s),(list of supported s)
OK