Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 122)

Wireless CPU ® Status Commands
General Indications +WIND
©Restricted Page: 116 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
: event identifier
0 the SIM presence pin has detected a "SIM removed"
1 the SIM presence pin has detected a "SIM inserted"
2 the calling party is alerting
3 the product is ready to process AT commands (except
phonebooks, AOC, SMS), at init or after AT+CFUN=1
4 the product is ready to process all AT commands, end of
phonebook init or swap (FDN to ADN)
5 a call has been created (after ATD or +CCWA…)
6 a call has been released, after a NO CARRIER, a
+CSSU: 5 indication, or after the release of a call waiting
7 the network service is available for an emergency call
8 the network is lost
9 the audio channel is opened
10 reload status of each SIM phonebook after init phase (after
power on or SIM insertion)
11 checksum of SIM phonebooks after initialization
12 an interruption has occurred (only if INTERRUPT feature is
activated)
13 the rack has been detected as closed
14 the rack has been detected as opened
15 the Wireless CPU ® has received a NITZ information message
from the network
16 SMS and SMS CB services are initialized