Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 256)

Data Commands
Bearer Type Selection +CBST
©Restricted
Page: 66 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
13.2.3 Parameters and Defined Values
: data call connection speed
used only for outgoing calls
0 autobauding, modem type: none (default value)
1 300 bps, modem type: V.21
2 1200 bps, modem type: V.22
3 1200/75 bps, modem type: V.23
4 2400 bps, modem type: V.22bis
5 2400 bps, modem type: V.26ter
6 4800 bps, modem type: V.32
7 9600 bps, modem type: V.32
8 specific
12 9600 bps, modem type: V.34
14 1400 bps, modem type: V.34
65 300 bps, modem type: V.110
66 1200 bps, modem type: V.110
68 2400 bps, modem type: V.110
70 4800 bps, modem type: V.110
71 9600 bps, modem type: V.110
75 14400 bps, modem type: V.110
: operating mode
0 no data compression is provided and only asynchronous
mode is supported (default value)
: connection element
0 transparent only
1 non transparent only (default value)
2 transparent preferred
3 non transparent preferred
13.2.4 Parameter Storage
All parameters are stored in EEPROM using the AT&W command. The default value
can be restored using AT&F.