Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 115)

Global Configuration Commands
Select Type of Address +CSTA
©Restricted Page: 109 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.21 Select Type of Address +CSTA
6.21.1 Description
This command selects the type of number for further dialing commands (D) according
to GSM specifications.
6.21.2 Syntax
Action command
AT+CSTA=
OK
Read command
AT+CSTA?
+CSTA:
OK
Test command
AT+CSTA=?
+CSTA: (list of supported s)
OK
6.21.3 Parameters and Defined Values
< type>:
type of address octet in integer format (refer to GSM 04.08
subclause 10.5.4.7)
145 international number
129 national number (default value)
6.21.4 Parameter Storage
The parameter is stored in EEPROM using the AT&W command. The default
value can be restored using AT&F.