Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual
Page 621

Audio Commands
Audio Diagnostic Start +WADS
©Restricted
Page:
73 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001
VOLUME 4
August 23, 2007
21.24.3 Parameters and Defined Values
DTMF used for the diagnostic
string type
possible values: {0-9,*,#,A,B,C,D}
duration of DTMF
5-250
in
20ms
unit
default value: 100ms (if omitted)
tone gain for the
Integer type
Default value if omitted: 9
The values are identical to those of the +WTONE (speaker)
command. See table in 21.16.3.
DTMF decoded.
possible values: {0-9,*,#,A,B,C,D}
5-500
in
20ms
unit
21.24.4 Parameter Storage
None.
21.24.5 Examples
Command
Responses
AT+WADS=?
+WADS: (0-9,*,#,A,B,C,D),(5-250),(0-
15)
OK
AT+WADS="1",100,10
+WADS: "1",100
OK
21.24.6 Notes
This command is available when the Wireless CPU
®
is in idle mode (no active voice
call) and when the current speaker is an anologic one.
The "OK" is received as soon as the DTMF sending has started. As long as the DTMF
has not been entirely played, trying to send a new one will result in receiving a
"+CME ERROR: 558" and the new DTMF will not be played.