beautypg.com

Dte-dce local flow control +ifc – Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual

Page 147

background image


Serial Port Commands

DTE-DCE Local Flow Control +IFC

©Restricted

Page:

141 / 184

This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.

WM_DEV_OAT_UGD_049 - 001

VOLUME 1

August 23, 2007

8.4

DTE-DCE Local Flow Control +IFC

8.4.1

Description

This command is used to control the operation of local flow control between the DTE

and DCE.

8.4.2

Syntax

Action command

AT+IFC=,

OK

Read command

AT+IFC?

+IFC: ,

OK

Test command

AT+IFC=?

+IFC: (list of supported s),(list of supported
s)

OK

8.4.3

Parameters and Defined Values

: local flow control parameter

0

none

2

RTS (default value)

: local flow control parameter

0

none

2

CTS

(default

value)