Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 280)

GPRS Commands
GPRS parameters customization: +WGPRS
©Restricted
Page: 90 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
: GPRS or EGPRS multislot class number. Please refer to [6] and
table in "Notes" section for more information
0 deactivate EGPRS mode (in order to establish GPRS TBF)
only available for EGPRS enabled Wireless CPU ® s and
=8
2 multislot class 2
8 multislot class 8
10 multislot class 10
: This parameter is returned in "AT+WGPRS?" response.
• for =0,1,2,3,5,6,7 and 9:
=
• for =4 and 8: =
: technologies available on the used network
0 neither GPRS nor EGPRS features supported
1 only GPRS feature supported
2 EGPRS feature supported
14.2.4 Parameter Storage
The and parameters are stored in EEPROM without using the AT&W
command.
The unsolicited network capability indication configuration is not stored in EEPROM,
even when using AT&W command.