Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 764)

APPENDIXES
Technical Appendixes
© Restricted
Page: 58 / 80
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 APPENDIXES August 23, 2007
3.3 Support of SIM ToolKit by the M.E.
This has been extracted from the GSM Technical specification 11.14.
TABLE 1 – Support of SIM Toolkit classes
Classes
Command description 1 2 3
CALL CONTROL X X
CELL BROADCAST DOWNLOAD X X
DISPLAY TEXT X X
EVENT DOWNLOAD
- MT call X
- Call connected X
- Call disconnected X
- Location status X
- User activity X
- Idle screen available X
GET INKEY X X
GET INPUT X X
GET READER STATUS $(MultipleCard)$ Lc
MENU SELECTION X X
MO SHORT MESSAGE CONTROL X
MORE TIME X X
PERFORM CARD APDU $(MultipleCard)$ Lc
PLAY TONE X X
POLLING OFF X X
POLL INTERVAL X X
POWER ON CARD $(MultipleCard)$ Lc
POWER OFF CARD $(MultipleCard)$ Lc
PROVIDE LOCAL INFORMATION X X
REFRESH X X X
RUN AT COMMAND $(AT$) Lc
SELECT ITEM X X
SEND SHORT MESSAGE X X
SEND SS X X
SEND USSD X
SET UP CALL X X
SET UP EVENT LIST X
SET UP IDLE MODE TEXT $(IdleModeText)$ X
SET UP MENU X X
SMS-PP DOWNLOAD X X X
TIMER MANAGEMENT $(Timer)$ Lc
TIMER EXPIRATION $(Timer)$ Lc
The table below indicates the commands of the supported letter classes:
TABLE 2 – Support of SIM Toolkit classes (Not supported)
Letter
classes
Command/function description
a Proactive command: GET READER STATUS
Proactive command: PERFORM CARD APDU
Proactive command: POWER ON CARD
Proactive command: POWER OFF CARD
Event download: Card reader status