Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 423)

Short message Commands
Service Center Address +CSCA
©Restricted
Page: 77 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
17.6 Service Center Address +CSCA
17.6.1 Description
This command is used to indicate to which service center the message must be sent.
The product has no default value for this address. If the application tries to send a
message without having indicated the service center address, an error will be
generated.
Therefore, the application must indicate the SC address when initializing the SMS.
This address is then permanently valid. The application may change it if necessary.
17.6.2 Syntax
Action command
AT+CSCA=,[,]
OK
Read command
AT+CSCA?
+CSCA= ,[,]
OK
Test command
None
17.6.3 Parameters and Defined Values
: service center address
: type of address of .
145 international number
129 national number