Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 160)

Serial Port Commands
Wavecom Ring Indicator Mode +WRIM
©Restricted Page: 154 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
8.10.5 Examples
Command Responses
AT+WRIM=?
Note : Ask for the list of possible values
+WRIM: 0
+WRIM: 1,(0-8388607),(0-33)
OK
Note : Possible mode values 0, 1
AT+WRIM=0
Note : Select up-down RI mode
OK
Note : Up-down RI mode selected
AT+WRIM=1,71
Note: bit field (0…0)1000111 (0x47 or decimal
71) to enable IP packets, RING, +CRING,
+CCWA, +CLIP, +CMT, +CMTI, +CDS,
+CDSI, +WBCI, +WDCI
OK
AT+WRIM?
Note : Ask for the current value
+WRIM: 1,71,0
OK
Note : Current mode is pulse RI
8.10.6 Notes
For +WIND intermediate unsolicited indications (e.g: +wind: 2, +wind: 5), no RI pulse
is generated.