Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 205)

GSM Network Commands
Cell environment description +CCED
©Restricted
Page: 15 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
16 1 + 2 +
dump> 4 + Neighbour1 to Neighbour6 Timing Advance (only
available for mode= 0)
Neighbour1 to Neighbour6 Timing Advance are only available in
IDLE mode.
+CCED: [
: step required for the RSSI indications between two +CSQ
unsolicited responses
range: 1-5 (default value: 1)
If not indicated, the previous value is taken into account
dump>:
This parameter gathers the following parameters for the Main Cell
parameters :
[],[],[][,],[],[Freq>],[],[],[Sub>],[],[],[Sub>],[]
dump>:
This parameter gathers the following parameters for the Neighbour
Cells parameters:
[],[],[][,],[],[Freq>],[]
x is between 1 and 6
TA>:
Neighbour cell Timing Advance
neighbours timing Advance are not available in dedicated mode.
x is between 1 and 6
: Mobile Country Code
3 digits
: Mobile Network Code
2 or 3 digits
: Location Area Code
string type; two byte location area code in hexadecimal format (e.g.
"00C3" equals 195 in decimal)