Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 175)

Security Commands
Enter PIN2 +CPIN2
©Restricted Page: 169 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
9.2.3 Parameters and Defined Values
: Personal Identification Number 2
four to eight digits number
: Personal Unblocking Key 2 needed to change the PIN2.
New Personal Identification Number 2
four to eight digits number
: SIM code status
READY no PIN2 is needed
SIM PIN2 PIN2 is required
SIM PUK2 PUK2 is required
9.2.4 Parameter Storage
None.
9.2.5 Examples
Command Responses
AT+CPIN2=1234 OK
Note: Enter PIN2 Note: PIN2 code is correct
AT+CPIN2=5678 +CME ERROR: 3
Note: Enter PIN2 Note: Operation not allowed, PIN2 previously
entered
AT+CPIN2=00000000,1234
Note: Enter PUK2 and new PIN2
+CME ERROR: 16
Note: Incorrect Password (PUK2)
AT+CPIN2=12345678,1234
Note: Enter PUK2 and new PIN2, 2 nd attempt
OK
Note: PUK2 correct, new PIN2 stored
AT+CPIN2=1234 OK